Dynoxide RTU

Perfect For:

AREAS OF USE: Use Dynoxide RTU on hard, non-porous surfaces in: Airplanes, Airports, Ambulances, Bathrooms, Boats, Buses, Business and Office Buildings, Cars, Convenience Stores, Day Care Centers, EMS Vehicles, Exercise Facilities, Hotels,  Institutional Facilities, Kitchens, Locker Rooms, Medical Related Facilities, Public Facilities, Restaurants, Schools, Ships,  Shower and Bath Areas.

TYPES OF SURFACES: Use Dynoxide RTU on washable hard, non-porous, non-food contact surfaces of: Bathroom fixtures, Cabinets, Cages, Chairs, Counters, Desks, Doorknobs, Floors, Garbage cans, Litter boxes, Outdoor furniture, Refrigerator exteriors, Showers, Sinks, Stoves, Tables, Telephones, Toilet exteriors, Toilet bowl surfaces, Tubs, Tiles (glazed), Urinal exteriors, Walls. Non-critical medical equipment surfaces: Beds, Crutches, Defibrillators, Examining tables, Rescue tools, Resuscitators, Stretchers, Stethoscopes, Walkers, Wheel chairs. Other hard non-porous surfaces made of: Glazed enamel surfaces, Metal, Plastic, Stainless Steel, Upholstery, vinyl and plastic, Woodwork, finished.


Description:

DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

To operate: Turn nozzle to on position and spray.

GENERAL CLEANING / DEODORIZING DIRECTIONS: Spray soiled area then wipe clean. Repeat for visibly soiled areas.

MOLD AND MILDEW CONTROL DIRECTIONS: Dynoxide RTU effectively inhibits the growth of mold and mildew, and the odors caused by them, when applied to hard, non-porous surfaces. Spray 6 - 8 inches from surface, until surfaces are visibly wet. Do not breathe spray. Allow to air dry on surface. Repeat every 7 days, or when growth returns.

DISINFECTION / *VIRUCIDAL DIRECTIONS: Surfaces must be pre-cleaned to remove visible soil prior to disinfecting. Spray 6 - 8 inches from surface, until surfaces are visibly wet. Do not breathe spray. Treated surfaces must remain visibly wet for 3 minutes. For SARS-CoV-2, treated surfaces must remain visibly wet for 1 minute. For Human Coronavirus and Measles Virus and Mumps Virus and RSV, treated surfaces must remain visibly wet for 30 seconds. For Canine Parvovirus, treated surfaces must remain visibly wet for 10 minutes. Wipe dry with a clean cloth, sponge, mop or towel, or allow to air dry. This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. (This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.) 

NON-ACID TOILET BOWL AND URINAL CLEANER DIRECTIONS: Apply Dynoxide RTU to exposed surfaces including under the rim with a sprayer. Use a toilet brush to scrub the bowl. Repeat and allow to remain visibly wet for 1 minute, then flush.

TO SANITIZE AND DEODORIZE NON-FOOD CONTACT SURFACES: Spray Dynoxide RTU until visibly wet. Treated hard, non-porous, non-food surfaces must remain visibly wet for 1 minute. Wipe dry with a clean cloth, sponge, mop or towel, or allow to air dry. For visibly soiled areas, pre-cleaning is required.

VETERINARY PRACTICE / ANIMAL CARE / ANIMAL LABORATORY / ZOOS / PET SHOP / KENNELS DISINFECTION DIRECTIONS: For cleaning and disinfecting hard, non-porous surfaces: equipment used for animal food or water, utensils, instruments, cages, kennels, stables, catteries. Remove all animals and feeds from premises, animal transportation vehicles, crates, etc. Remove all litter, droppings and manure from floors, walls and surfaces of facilities occupied or traversed by animals. Empty all feeding and watering appliances. Thoroughly clean all surfaces with soap or detergent and rinse with water. Saturate all surfaces by spraying with Dynoxide RTU and allow them to remain visibly wet for 3 minutes, 10 minutes for Canine Parvovirus. Spray hard, non-porous surfaces of equipment used in handling and restraining animals as well as forks, shovels and scrapers used for removing litter and manure. Wipe or allow to air dry. Rinse all surfaces that come in contact with food, including equipment used for feeding or watering, with potable water before reuse. Ventilate buildings and other closed spaces. Do not house animals or employ equipment until treatment has been absorbed, set or dried.

VEHICLES: Wash all vehicle surfaces including mats, crates, cabs and wheels with water and soap or detergent. Saturate all surfaces by spraying with Dynoxide RTU and allow them to remain visibly wet for 3 minutes, 10 minutes for Canine Parvovirus. Then allow to air dry.

For use as a One-Step Cleaner and Disinfectant by Electrostatic Spraying: Electrostatic spray application is for efficacy claims with a 3 minute contact time. This application method is not to be used to treat surfaces for Canine parvovirus or sanitization claims. (1) Consult user manual for electrostatic sprayer before use. (2) Ensure bystanders and pets are not present in the room during application. (3) Clean visibly soiled surfaces prior to spraying. (4) Wear a half face respirator with a chemical specific cartridge and a N95 filter, and eye protection (goggles, face shield or safety glasses) when spraying. Users should evaluate potential exposure concentrations and comply with OSHA guidelines for respirator protection. (5) Select a spray nozzle that produces spray droplet particles with a volume median diameter (VMD) ≥80 μm. (6) Place the electrostatic spray function in the ON position for electrostatic spray models that have the functionality to toggle ON/OFF. (7) Hold the sprayer nozzle 8 - 12 inches away from the target surface. Starting at the highest point and working down to the lowest point, spray target surfaces using a smooth methodical “S” pattern. To avoid leaving gaps in sprayed surfaces, overlap previously treated surfaces when moving onto subsequent sections. (8) The target surface must remain visibly wet for 3 minutes. Re-apply product as necessary to keep surface visibly wet for the duration of the contact time. Wipe surfaces dry (or rinse) (or allow to air dry). (9) Allow the treated room to remain unoccupied for 15 minutes before reentering.


Dilution Ratios:

Ready To Use


Safety Data Sheets:

US English SDS
US Spanish SDS


Active Ingredients:

Hydrogen peroxide (CAS#: 7722-84-1)

Other Ingredients:

Water (CAS#: 7732-18-5)
Methanesulfonic acid (CAS#: 75-75-2)
Orthophosphoric acid (CAS# 7664-38-2)
2-Ethyl Hexanol EO-PO Nonionic Surfactant (CAS# 64366-70-7)
Trisodium EDDS (CAS# 178949-82-1)